A dual inline memory module (DIMM) consists of a number of memory components (usually black) that are attached to a printed circuit board (usually green). The gold pins on the bottom of the DIMM provide a connection between the module and a socket on a larger printed circuit board. The pins on the front and back of a DIMM are not connected to each other.
184-pin DIMMs are used to provide DDR SDRAM memory for desktop computers. Standard 184-pin DIMMs are available in PC1600 DDR SDRAM, PC2100 DDR SDRAM, PC2700 DDR SDRAM, and PC3200 DDR SDRAM.
To use DDR memory, your system motherboard must have 184-pin DIMM slots and a DDR-enabled chipset. A DDR SDRAM DIMM will not fit into a standard SDRAM DIMM socket. (Information about which memory technology your system uses is included in the Crucial Memory Advisor™ tool.)
The number of black components on a 184-pin DIMM can vary, but it always has 92 pins on the front and 92 pins on the back, for a total of 184. 184-pin DIMMs are approximately 5.25 inches long and 1.25 inches high, though the heights can vary. While 184-pin DIMMs and 168-pin DIMMs are approximately the same size, 184-pin DIMMs have only one notch within the row of pins.
Do you have questions about this product?You may contact Customer Service or...
get answers from real customers and in-house experts with AnswerBox.
Q:Can you advise if these modules are high or low density?
A:That module is low density (16 chips).
Will there be a 16 GB (dual-ranked, DDR3) ECC UDIMM? (And if not, why not?)
The currently released Ivy Bridge and Haswell server chips only support UDIMM. Now, 1x16GB RDIMM is available in a few products. But 1x16GB UDIMM seems to not exist. This limits Ivy Bridge and Haswell servers to 32GB, and that's with 2x8 meaning the memory channels must slow down.
I have: Crucial Ballistix Tactical Tracer 16GB Kit (8GBx2) DDR3 1600 MT/s (PC3-12800) CL8 @1.5V UDIMM 240-Pin BLT2CP8G3D1608DT2TXRG
Trying to use with GA-Z87N-WIFI
If I use a single stick it works fine (either stick alone is good) if I use both the system won't boot. I thought based on the specs it would be fine - am I wrong or do I have a bad MOBO?
In a previous message I asked if CT2KIT102464BA160B 16gb (8x2) was compatible with my Dell 435t/9000 system which had 9gb RAM at the time. Dell, and the Crucial Scanner, says my system is upgradable to 24 gb of RAM. I was told the above part number was indeed compatible with my system.
I just received the above kit and my system is only recognizing 4gb in each of the two banks where I have the 8gb memory cards installed. My system is only showing 16gb instead of the 23gb it should. If it recognizes only 4gb in each bank I wonder why it shows 16gb instead 15gb?
What is happening? I have the scanner results URL listed below.
Thank you in advance
Update: Bios shows 23,552 Ram Installed, but Windows 7 64bit still shows 16gb installed.
Tried going to msconfig -boot- advanced options- I clicked the maximum memory box and tried to enter in the amount of RAM that was supposed to be there ( 23,552 ) but it wouldn't let me enter in more than (16,384). I'm trying everything I know how, plus rereading past posts. No luck so far...I'm thinking it won't recognize more than 4gb per slot for some reason.
Hi, a few weeks back I bought a second hand laptop (a Toshiba Satellite Pro A300-193). The man at the shop told me that it was low on RAM (2gb) and suggested I install more for extra speed.
On a recommendation from my friend I came to crucial.com and had my computer scanned; the result suggested that I had 2 options. I chose the cheaper option 2x1gb Ram cards, however on opening the laptop up I can't find how to fit them; as there only seems to be space for 2 sticks (I already have 2x1gb cards fitted). Can anyone advise me how to fit them please? Thanks.
Sorry, I can't even find a proper manual for your system! Their site has links to get manual's, but when you go to that section it's blank and there is no download links
Takes you here to download, but following link after this is blank (So is the FAQ link!)
Then here, nothing!
Generic manual here, but that's no help of course
You may need to contact them directly and see if they will email you a PDF or link you to some info. I looked in google for a long time, and youtube too, no info on how to tear down or disassemble this system!
If you get it partially apart, and need further help, you can post some images and I can try to help if you want.