These 21.5" and 27" systems utilize one of the following processors:
3.06GHz Intel Core 2 Duo, 3.33GHz Intel Core 2 Duo, 2.66GHz Quad Core Intel Core i5 or 2.8GHz Quad Core Intel Core i7
A 3.5" bracket is required to mount the SSD in your system. Our part number for the bracket is CTSSDCONVT.
|Specs||DDR3 PC3-8500 CL=7 Unbuffered NON-ECC DDR3-1066 1.5V 256Meg x 64 lead free halogen free for Mac|
|Bullet Features||Increases system performance|
To use DDR3 memory, your system must have both a 204-pin SODIMM slot and a chipset that supports DDR3 memory. A DDR3 SODIMM will not fit into DDR2 or DDR memory sockets.
SODIMMs are smaller and thinner than regular DIMMs, and the 204-pin SODIMM PCBs are always ~2.6 inches long and are usually around 1.18 inches high (though the heights can vary slightly). They consist of a number of memory components (usually black) that are attached to a printed circuit board (usually green). The number of memory components on a 204-pin SODIMM's printed circuit board (PCB) can vary, but the PCB will always have 102 pins on the front and the back both, for a total of 204 pins. The gold pins on the bottom of the SODIMM provide the connection between the memory module and the memory socket.