Crucial 2GB Kit (2 x 1GB) DDR2-800 SODIMM

you may also be interested in:

Crucial 2GB Kit (2 x 1GB) DDR2-800 SODIMM

product information

Amount of available storage on the module. If there are parenthesis shown – for example (2 x 4GB) – it indicates a kit of 2 or more identical modules is used to reach the Total Capacity.

Number of modules. Memory can be installed as single modules or in kits comprised of 2 or more identical modules. Each module requires its own slot for installation.

Product Specifications
Brand	Crucial
Form Factor	SODIMM
Total Capacity	2GB kit (1GBx2)
Warranty	Limited Lifetime
Specs	DDR2 PC2-6400 • CL=6 • Unbuffered • NON-ECC • DDR2-800 • 1.8V • 128Meg x 64 •
Series	Crucial
ECC	NON-ECC
Module Qty	2
Speed	800MHZ
Tracer	False
Voltage	1.8V
DIMM Type	Unbuffered
Bullet Features	Increases system performance

More information

Memory spec terms
If you're not sure if a module is right for your system, use the Crucial Memory Advisor tool for a list of guaranteed compatible modules.

NON-ECC/Non-parity Most desktop and laptop computers take NON-ECC or Non-parity memory.

ECC/Parity ECC or parity modules look for errors in data and are most often found in servers and other mission-critical applications used by large networks and businesses.

Unbuffered Most PCs and workstations use unbuffered memory which is faster than registered memory.

Registered/Buffered Registered or buffered modules delay all information transferred to the module by one clock cycle. This type of memory is primarily used in servers.

Fully buffered Designed for next-generation servers, features an advanced memory buffer.

CL —CAS (column address strobe) latency, which is the number of clock cycles it takes before data starts to flow after a command is received. Lower CL is faster. Modules with different CL can be mixed on a system, but the system will only run at the highest (slowest) CL.

Component configuration —(For example: 64Meg x 64) Indicates the size of the memory chip components on the module.

Voltage For example 2.6V. Indicates the power used by the module. The lower the better.

Check the glossary and knowledgebase for more detailed definitions.

200-pin SODIMM

A small outline dual inline memory module (SODIMM) consists of a number of memory components (usually black) that are attached to a printed circuit board (usually green). SODIMMs get their name because they are smaller and thinner than regular DIMMs. The gold pins on the bottom of the SODIMM provide a connection between the module and a socket on a larger printed circuit board. The pins on the front and back of a SODIMM are not connected.

200-pin SODIMMs are used to provide DDR and DDR2 SDRAM memory for notebook computers. To use DDR or DDR2 memory, your system motherboard must have 200-pin SODIMM slots and a DDR- or DDR2-enabled chipset. A DDR or DDR2 SODIMM will not fit into a standard SDRAM SODIMM socket. (Information about which memory technology your system uses is included in the Crucial Memory Advisor™ tool.)

The number of black components on a 200-pin SODIMM can vary, but it always has 100 pins on the front and 100 pins on the back, for a total of 200. 200-pin SODIMMs are approximately 2.625 inches long and 1.25 inches high, though the heights can vary. Like 144-pin SODIMMs, 200-pin SODIMMs have one small notch within the row of pins; however, the notch on the 200-pin SODIMMs is closer to the left side of the module.

product reviews